주요콘텐츠로 건너뛰기
[최고급 프로파일링 앰프 파워 랙!!] KEMPER PROFILER Power Rack



SPEC
DIMENSIONS
Head/PowerHead
- Height: 21.7 cm (8.54 inches)
- Width: 37.8 cm (14.88 inches)
- Depth: 17.3 cm (6.81 inches)
- Height: 13.9 cm (5.47 inches),
- 3 HE (3 RU)
- Width: 48.3 cm (19 inches)
- Depth: 22 cm (8.66 inches)
WEIGHT
- Head: 5.32 kg (11.73 pounds)
- Rack: 5.00 kg (11.02 pounds)
- PowerHead: 6.50 kg (14.33 pounds)
- PowerRack: 6.18 kg (13.62 pounds)
POWER AMP
PowerHead and PowerRack
- 600 Watts at 8 Ohm
- 300 Watts at 16 Ohm
DIGITAL INPUTS AND OUTPUTS
- S/PDIF In/Out 44.1 kHz (24 bit)
- with RCA Phone connectors (Master only)
ANALOG INPUTS
Front Input
- ¼ inch TS unbalanced, dynamic range >108dB, impedance 1 MegOhm
Alternative Input
- ¼ inch TRS balanced with ground lift, dynamic range =105dB
Return
- XLR balanced, ¼ inch balanced with ground lift, dynamic range =105dB
ANALOG OUTPUTS
Master L and R Outputs
- XLR balanced, ¼ inch TS unbalanced with ground lift max. output level: XLR +22dBu, TS +16dBu
Monitor Output
- ¼ inch TS unbalanced with ground lift max. output level: +16dBu
Direct Output/Send
- ¼ inch TS unbalanced with ground lift max. output level: +16dBu
Output Dynamic Range
Dedicated Headphone Output
CONTROL AND DATA INTERFACES
Midi
- 5-pin DIN connectors for In/Out/Thru
Switch/Pedal
- Two 1/4 inch TRS, each for
- mono/stereo switch or expression pedal (10kOhm min, 100kOhm max. impedance)
Network
USB
- USB 2.0 (FS) compatible device
- USB-A and USB-B connectors
ELECTRICAL REQUIREMENTS
Line Voltage
- Head/Rack 100-240V. AC, max. 0.5. A
- PowerHead/PowerRack 100-125 or 190-245V. AC, max. 10. A
Frequency
- 50Hz to 60Hz, single phase
ENVIRONMENTAL REQUIREMENTS
- Operating Temperature: 10° to 35° C (50° to 95° F)
- Non-operating Temperature: -20° to 47° C (-4° to 116° F)
- Relative Humidity: 5% to 95% non-condensing
- Maximum Altitude: 3000 m (10,000 feet)